Skimmer Flight speed adjustment can be adjusted by either the potentiometer on the panel cover or adjust using the VFD in the panel to limit speed adjustment of the pot.
When to increase or decrease flight speed is dependent on customer process. If float is being seen in the clearwell, recommend increasing speed and possibly decrease flight delay (See below for adjusting delay). Decrease flight speed when float is very minimum on flights and very little float going into the float hopper.
How do I adjust my Flight Delay? Ask what their current settings are at compare the settings to the “Skimmer Flight Time Delay Relay” instructions below. Standard setting is 30 seconds. To increase delay, add more time by switching on 32 or to decrease time, switch off times.

• Float auger speed adjustment can be adjusted by either the potentiometer on the panel cover or adjust using the VFD in the panel to limit speed adjustment of the pot.
• Bottom auger speeds adjustment can be adjusted by either the potentiometer on the panel cover or adjust using the VFD in the panel to limit speed adjustment of the pot.
• Mixer speeds adjustment can be adjusted by either the potentiometer on the panel cover or adjust using the VFD in the panel to limit speed adjustment of the pot.